Date   
Re: Electrical System #Solar

Kilovolt
 

I've included a few Excel spreadsheets that should be of help.

4Bs/73

Re: Electrical System #Solar

 

Hi Douglas,

My advice is to layout the whole system on paper and try your hardest to plan for the END result without taking shortcuts.  If money is an issue it's fine to setup a small 100W system for the radio, cellphones, flashlight batts, etc. first then build a separate system later..

Take a look at what OFFGRIDHAM, VIKING PREPAREDNESS (YouTube), COMMSPREPER (YouTube) have on their site.  Lots of good info.  Also for a step by step 400W system TINFOILRANCH did s good job.

Keep us updated on what you are doing, many others are thinking about it also and would appreciate your insight as it develops.


Electrical System #Solar

 

I have started building my off grid system.  I have some batteries that I can charge by plugging into the house system with a small charger.  What I want to be able to do is have a system that uses solar, generator and eventually wind electrical generation.  I would like the system to be able to go between generator/shore power and wind/solar as seamless as possible.  I want to be able to charge the batteries from the generator when there is little to now wind or solar for extended periods and to possibly have a small and as efficient as possible ac to keep the radios and pis cool in the shack.

What are good ways to do this? 

Eventually my entire house will be off grid, but that will take time.  I am starting with my ham shack to be completely off grid, but have my generator be able to power the house lighting and other minor systems when power goes out.  Here in the desert southwest we really like our a/c in the summer, but large central ac systems and even window units use large amounts of electricity.

Re: 01/12/202 new article posted at offgridham.com

James Dyke
 

A very good article indeed. Now, how to use what you have written and put it in something that is workable for each Ham. Though I am an old guy and had my ticket for a few years, I consider myself a newbe. Local clubs, they seem to like meetings more than radio. I try and glean info whenever I can and wish there were indeed Elmers, no matter what age, doing what Elmers did 50 years ago, passing on the world of radio and electronics to those who want to learn.

 

From: main@OffGridComms.groups.io <main@OffGridComms.groups.io> On Behalf Of JAMES ILOTT
Sent: Sunday, January 12, 2020 4:33 PM
To: main@OffGridComms.groups.io
Subject: Re: [OffGridEmComms] 01/12/202 new article posted at offgridham.com

 

Very useful thanks G4KWW


From: main@OffGridComms.groups.io <main@OffGridComms.groups.io> on behalf of jmencel <jmencel@...>
Sent: Sunday, January 12, 2020 10:54:29 PM
To: main@OffGridComms.groups.io <main@OffGridComms.groups.io>
Subject: Re: [OffGridEmComms] 01/12/202 new article posted at offgridham.com

 

Thank you! Great article.

 

John

VE3WEQ

 

 

 

Sent from my Galaxy Tab® A

 

-------- Original message --------

From: Mike <mikel@...>

Date: 2020-01-12 12:44 PM (GMT-05:00)

Subject: Re: [OffGridEmComms] 01/12/202 new article posted at offgridham.com

 

Chris,

Great article.  I will definitely refer new hams to read it and the rest
of your blog.

Also, it not often you can use the word, "recalcitrant".   Proverbs
25:11, "A word fitly spoken is like apples of gold in a setting of silver."

Mikel

On 1/12/2020 10:55 AM, Chris Warren/offgridham.com via Groups.Io wrote:
> Happy new year everyone! Here's some ideas for new hams: 
>
> https://offgridham.com/2020/01/ham-radio-beginner/
>


Re: 01/12/202 new article posted at offgridham.com

JAMES ILOTT
 

Very useful thanks G4KWW


From: main@OffGridComms.groups.io <main@OffGridComms.groups.io> on behalf of jmencel <jmencel@...>
Sent: Sunday, January 12, 2020 10:54:29 PM
To: main@OffGridComms.groups.io <main@OffGridComms.groups.io>
Subject: Re: [OffGridEmComms] 01/12/202 new article posted at offgridham.com
 
Thank you! Great article.

John
VE3WEQ



Sent from my Galaxy Tab® A

-------- Original message --------
From: Mike <mikel@...>
Date: 2020-01-12 12:44 PM (GMT-05:00)
To: main@OffGridComms.groups.io
Subject: Re: [OffGridEmComms] 01/12/202 new article posted at offgridham.com

Chris,

Great article.  I will definitely refer new hams to read it and the rest
of your blog.

Also, it not often you can use the word, "recalcitrant".   Proverbs
25:11, "A word fitly spoken is like apples of gold in a setting of silver."

Mikel

On 1/12/2020 10:55 AM, Chris Warren/offgridham.com via Groups.Io wrote:
> Happy new year everyone! Here's some ideas for new hams: 
>
> https://offgridham.com/2020/01/ham-radio-beginner/
>



Re: 01/12/202 new article posted at offgridham.com

jmencel
 

Thank you! Great article.

John
VE3WEQ



Sent from my Galaxy Tab® A

-------- Original message --------
From: Mike <mikel@...>
Date: 2020-01-12 12:44 PM (GMT-05:00)
To: main@OffGridComms.groups.io
Subject: Re: [OffGridEmComms] 01/12/202 new article posted at offgridham.com

Chris,

Great article.  I will definitely refer new hams to read it and the rest
of your blog.

Also, it not often you can use the word, "recalcitrant".   Proverbs
25:11, "A word fitly spoken is like apples of gold in a setting of silver."

Mikel

On 1/12/2020 10:55 AM, Chris Warren/offgridham.com via Groups.Io wrote:
> Happy new year everyone! Here's some ideas for new hams: 
>
> https://offgridham.com/2020/01/ham-radio-beginner/
>



Re: 01/12/202 new article posted at offgridham.com

Mike
 

Chris,

Great article.  I will definitely refer new hams to read it and the rest
of your blog.

Also, it not often you can use the word, "recalcitrant".   Proverbs
25:11, "A word fitly spoken is like apples of gold in a setting of silver."

Mikel

On 1/12/2020 10:55 AM, Chris Warren/offgridham.com via Groups.Io wrote:
Happy new year everyone! Here's some ideas for new hams: 

https://offgridham.com/2020/01/ham-radio-beginner/

01/12/202 new article posted at offgridham.com

Chris Warren/offgridham.com
 

Happy new year everyone! Here's some ideas for new hams: 

https://offgridham.com/2020/01/ham-radio-beginner/

How Good J8CALL?

 

Good enough that I had a DECODE at -10db without having an antenna on my FT817!!  Seriously, it decoded and when I went to tune up I noticed there was only COAX connected tot the radio.

Re: JS8Call 2.1 - Slow Mode

 

Yeap, propagation has been the same here also. You can forget SSB for the 80m daily net here, haven’t been able to even hear them for a month.

I put 200+ characters in INFO yesterday and left SPOT on, pskreporter grabbed the whole message. Would take a while in slow mode that’s for sure. 

Not sure how pskreporter grabs it without asking? Incremental sending in the background?

Sent from ProtonMail Mobile


On Sun, Dec 29, 2019 at 4:09 AM, randall krippner <randallkrippner@...> wrote:
I'm glad I finally got it to work. Come to think of it, there might have been a bug in the past version of JS8 because before I'd upgraded to the new version the other day, I'd do an ALLCALL asking if anyone had a msg for me and I'd see just a MSG ID 94 (or something like that) pop up, but not highlighted as being addressed to me and with no call sign from the sending station and I was just ignoring it for that reason. With this new version as soon as I asked if there was a msg for me the fellow from AZ popped up right away as it should.

Never thought about using INFO that way for some reason. That would work fine for sending a short status message. I really need to experiment more with JS8 so I feel more comfortable with it.

Propagation has been weird here. I haven't been able to make any kind of reliable contacts except with FT8 or JS8. Terrible fading. An S9 or better signal will drop to below the noise level within a few seconds, then reappear a minute or two later even stronger, then fade to nothing again. I got the TS-990 moved to the new workshop/radio shack so I've been using that instead of the Yaesu 450, and even with that I'm having trouble. I was playing with CW on 40 meters the other day and it was terrible. I'd hear someone calling CQ with an S9 signal or better, and by the time he got to sending his call he'd fade into nothing. I checked the antenna and there was nothing wrong with that. I switched to the mag loop and the same thing was going on with it. Even with the power cranked up to 200 watts on the vertical antenna I was only showing up on two stations on the reverse beacon network. Same thing yesterday. So I switched to FT8 and almost immediately made a solid contact with a station in Japan. Sheesh...


Re: JS8Call 2.1 - Slow Mode

randall krippner
 

I'm glad I finally got it to work. Come to think of it, there might have been a bug in the past version of JS8 because before I'd upgraded to the new version the other day, I'd do an ALLCALL asking if anyone had a msg for me and I'd see just a MSG ID 94 (or something like that) pop up, but not highlighted as being addressed to me and with no call sign from the sending station and I was just ignoring it for that reason. With this new version as soon as I asked if there was a msg for me the fellow from AZ popped up right away as it should.

Never thought about using INFO that way for some reason. That would work fine for sending a short status message. I really need to experiment more with JS8 so I feel more comfortable with it.

Propagation has been weird here. I haven't been able to make any kind of reliable contacts except with FT8 or JS8. Terrible fading. An S9 or better signal will drop to below the noise level within a few seconds, then reappear a minute or two later even stronger, then fade to nothing again. I got the TS-990 moved to the new workshop/radio shack so I've been using that instead of the Yaesu 450, and even with that I'm having trouble. I was playing with CW on 40 meters the other day and it was terrible. I'd hear someone calling CQ with an S9 signal or better, and by the time he got to sending his call he'd fade into nothing. I checked the antenna and there was nothing wrong with that. I switched to the mag loop and the same thing was going on with it. Even with the power cranked up to 200 watts on the vertical antenna I was only showing up on two stations on the reverse beacon network. Same thing yesterday. So I switched to FT8 and almost immediately made a solid contact with a station in Japan. Sheesh...

Re: JS8Call 2.1 - Slow Mode

 

Looks like the INFO area can have 255 characters...  I have a simulated emergency message in mine right now, anyone asking for info will get my SITREP and REGIONAL news that I have stuck in there.

This would be a great way to pass info quickly IMO while AmRRON is using it for personal SITREPS, I think there needs to be a NEWS element in there also.

Here is a challenge for you... identify and report back the NEWS I'm sending about my area from my INFO in JS8Call.

I have the FT-817 running all day @ 5 W on slow mode in auto response.

Re: JS8Call 2.1 - Slow Mode

 

FB on MSG received.  It's amazing how up/dn the bands are lately and how fast!  What irritates me is guys that will call CQ, I answer and think we are going to start a ragchew then on the first fade the give the 73!?

How about working the problem! ;)  Filter the signal up or just stay on it for a few minutes.

Anyway, it's cool that I can get a message across the USA a week later via using other's mailboxes, but I have a feeling that all that goes away without grid power.  People are not going to keep their stations running 24/7 in grid down situations.

That's where a "digital wilderness protocol" needs to be in place.  Everyone in the "net" stores messages for the group (SITREPS) in their INFO and is retrieved with @OGCOMMS or the group you are apart of.  I'm going to test how much info I can put in there next time I'm on the air.

I had hoped that you could store a MSG against @OGCOMMS and everyone could "ping" @OGCOMMS for any messages stroed to it, but that's a no-go.  The INFO tag will work this way though.

Re: JS8Call 2.1 - Slow Mode

randall krippner
 

Finally got the msg! Relayed via W7SUA in Chino Valley, AZ

Re: JS8Call 2.1 - Slow Mode

randall krippner
 

Very true, Jed :) As one of my kids pointed out to me once, I have more fun solving the problems associated with all of this than I do actually using the equipment sometimes.  Merry Christmas and I hope you have a great New Year!

Randall
KC9YGN

Re: JS8Call 2.1 - Slow Mode

James Dyke
 

Randall,

 

If it wasn’t frustrating it would be CB. We love a challenge! Keeps the gray matter charged.

Merry Christmas

-Jed

N6JED

 

From: main@OffGridComms.groups.io <main@OffGridComms.groups.io> On Behalf Of randall krippner
Sent: Tuesday, December 24, 2019 8:57 PM
To: main@OffGridComms.groups.io
Subject: Re: [OffGridEmComms] JS8Call 2.1 - Slow Mode

 

I haven't tried checking @ALLCALL in a few days now. I don't have anything going on Christmas morning so I'll probably be on then and will try.

The informal experiments I've tried at various power levels pretty much confirms your comment on power. With the conditions I had at the time and the equipment I was using, anything over 50 - 75 watts was a waste of electricity. There was no really noticeable difference in 

I'm afraid I haven't had much luck with Europe either. I could try to blame it on the antenna I'm using now, a GAP Titan vertical, but I can't because I've hit the EU fairly regularly with FT8 on this same antenna and similar power levels. I did get a contact with Belgium a couple of weeks ago, but that's been very rare. Propagation conditions here have been disappointing. I've been trying to work CW for the past few days on 40 meters but without any luck. I turned up on the reverse beacon network so I was getting out but didn't get a reply to CQs. I normally don't do CW because I have some issues with deciphering it by ear, but I now have a decoder that actually seems to work so I've been playing with that. Not that it did much good. Lots of fading. Signals can be S9 one moment and drop under the noise floor the next. Makes it frustrating.

Re: JS8Call 2.1 - Slow Mode

randall krippner
 

I haven't tried checking @ALLCALL in a few days now. I don't have anything going on Christmas morning so I'll probably be on then and will try.

The informal experiments I've tried at various power levels pretty much confirms your comment on power. With the conditions I had at the time and the equipment I was using, anything over 50 - 75 watts was a waste of electricity. There was no really noticeable difference in 

I'm afraid I haven't had much luck with Europe either. I could try to blame it on the antenna I'm using now, a GAP Titan vertical, but I can't because I've hit the EU fairly regularly with FT8 on this same antenna and similar power levels. I did get a contact with Belgium a couple of weeks ago, but that's been very rare. Propagation conditions here have been disappointing. I've been trying to work CW for the past few days on 40 meters but without any luck. I turned up on the reverse beacon network so I was getting out but didn't get a reply to CQs. I normally don't do CW because I have some issues with deciphering it by ear, but I now have a decoder that actually seems to work so I've been playing with that. Not that it did much good. Lots of fading. Signals can be S9 one moment and drop under the noise floor the next. Makes it frustrating.

Re: JS8Call 2.1 - Slow Mode

 

I've noticed that if I can't hit a station with 10W I can't with 50W.  I guess the old QRP vs. QRO argument holds even with JS8CALL!

I''m staying on the coast right now and was looking forward to playing with 2.1, but all I have are wires with me and no place to hand them at the motel.  On the plus side... the wide said I could get a new Super Antenna for such occasions. :)

I've been trying to leave you messages Randall, but no luck so far.  You do check @ALLCALL every now and then, yes?  Just a matter of time!  My goal is to get one to OH8STN in Finland also.
Anyway, JS8 is amazing. I think this is the best thing to happen to amateur radio in years
Ditto on that!

Re: JS8Call 2.1 - Slow Mode

randall krippner
 

I haven't tried the slow mode yet. I just upgraded yesterday and haven't had time to do much with it. I'm looking forward to it.

The results I've seen at QRP levels just using standard mode have been surprisingly good. Even when I was using the mag-loop antenna down in the basement with the Yaesu 818 running about 3 watts I would still be getting ACKs from a half dozen US and Canada stations. So I'm looking forward to trying the new "slow" mode with that rig and seeing what kind of results it gets.

I ran an informal experiment the other day after I finally got all the equipment moved into the new shop/radio shack in the basement. I had the Kenwood TS-990 hooked to a GAP Titan multi-band vertical, and was sending heartbeats at various power levels, gradually cranking up the power to see the effects on PSK Reporter. Once I hit 75 watts I seemed to reach the saturation point, so to speak. Increasing power levels beyond that point didn't increase the range or saturation after that point except by an insignificant number of stations. I ran the power up to about 150 watts and saw no significant increase in the number of reports nor in the range I was reaching.

Anyway, JS8 is amazing. I think this is the best thing to happen to amateur radio in years

Re: JS8Call 2.1 - Slow Mode

 

Back to back HB, normal then slow.  Look at the difference in being heard.  This is 10W.